!  The default startup configuration file for Cisco Router and Security Device Manager (SDM)
!  DO NOT modify this file; it is required by SDM as is for factory defaults
!  Version 1.0
!
hostname yourname
!
logging buffered 51200 warnings
!
username cisco privilege 15 secret 0 cisco
!  
ip domain-name yourdomain.com
!
interface FastEthernet0/0
 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-FastEthernet0/0$
 ip address 10.10.10.1 255.255.255.248
 no shutdown 
!
ip http server
ip http secure-server
ip http authentication local
ip http timeout-policy idle 5 life 86400 requests 10000
!
banner login ^
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device. 
This feature requires the one-time use of the username "cisco" 
with the password "cisco".

Please change these publicly known initial credentials using SDM or the IOS CLI. 
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use. 

For more information about SDM please follow the instructions in the QUICK START 
GUIDE for your router or go to http://www.cisco.com/go/sdm 
-----------------------------------------------------------------------
^
!
line con 0
 login local
line vty 0 4
 privilege level 15
 login local
 transport input telnet
 transport input telnet ssh
line vty 5 15
 privilege level 15
 login local
 transport input telnet
 transport input telnet ssh
!
!  End of SDM default config file
end